2024 Women's Day, the company's female compatriots received special care and gifts!

Before welding, the aluminum foil Mylar needs to be peeled off by laser. If there are still various impurities and pollutants on the aluminum foil, it will seriously affect the subsequent welding of metal parts such as terminals, copper sheets and the aluminum foil, and ultimately affect the accuracy and performance of the product test. efficient…… Part 1 The composition of high-speed cables High-speed cable (Direct Attach Cable) is abbreviated as DAC (common DAC high-speed cable classification and model), generally translated as direct connection cable or direct connection copper cable, using silver-plated copper conductor and foamed insulated core wire as the material, using a separate wire The way of shielding and total shielding constitutes a high-speed cable. The cable composition structure is mainly divided into four layers:   DAC level one C...

This article is transferred from [cnBeta.COM]; Recently, researchers have successfully developed a new data transmission system that pairs high-frequency silicon chips with hair-thin polymer cables to achieve information transmission speeds 10 times faster than USB. The system may one day improve the energy efficiency of data centers and reduce the load on electronic components.   This research was published at the IEEE International Conference on Solid-State Circuits in February this year. The main author is Jack Holloway '03, MNG '04. He completed his PhD in the Department of Electrical Engineering and Computer Science (EECS) at the Massachusetts Institute of Technology last fall. Degree, currently working in Raytheon Company. Co-authors include Ruonan Han, Holloway's PhD supervisor and associate professor at EECS, and Georgi...

Overview of wire and cable manufacturing process The manufacturing of wires and cables is completely different from the production of most electromechanical products. Electromechanical products usually adopt the assembly of other parts into parts, and the assembly of multiple parts into a single product, and the products are measured by the number of units or pieces. Wire and cable are based on length as the basic unit of measurement. All wires and cables start from the processing of conductors, adding insulation, shielding, cabling, and sheathing layer by layer to the periphery of the conductor to make wire and cable products. The more complex the product structure, the more layers of overlap. 1. Process characteristics of wire and cable product manufacturing: 1. Large-length continuous stacking combined production method The large-length continuous stacking combined production...