DP 2.1 80G

DisplayPort 2.1 DisplayPort cable standard, optimizes the configurations for full size and mini size DisplayPort cable, enhances its robustness, thereby improving connection quality and increasing cable length (DP40 cable exceeding 2 meters long, DP80 cable exceeding 1 meter long) without compromising UHBR performance. The DP40 cable certified by VESA supports UHBR10 link rate (10 Gbps), four channel operation, and provides a maximum throughput of 40Gbps; The DP80 cable certified by VESA supports UHBR20 link rate (20 Gbps), four channel operation, and provides a maximum throughput of 80 Gbps.

 

Model :
 
Size :
 
share

Related Products

The Display Port standard specifications an open digital communications interface for use in both internal connections,such as interfaces within a PC or monitor, and external display connections, including interfaces between a PC and monitor or projector, between a PC and TV, or between a device such as a DVD player and TV display

 

Model :
 
Size :
 

Based on DVI,HDMI was developed It is suited for digital television, DVD play, as other digital audio visual products It can transmit high analytic video and multi-track audio materials in digital form with highquality。 And the highest transmission speed is 10 2Gbps In the cable, the audio and video signals are put intoone cable Therefore, it does not need many cables like the audiovisual cable with analogous method HDMIhas adopted small interface which is suited for digital portable In addition, it still support the standard 5specifications, the EIA CEA861x of Consumer Electronics Association in home appliances field

 

Model :
 
Size :
 

USB4, In 2019, USB-IF integrated the Thunderbolt 3 protocol (TBT3) on the basis of USB 3.2 , launched USB4 Gen 2x2 and USB4 Gen 3x2. The difference between the past is that the name USB 3.2 is still retained. USB4 is a doubling of the original USB 3.2 transmission speed, reaching 40Gbps, which is the speed of USB4 Gen 3x2. USB4 supports both USB 3.2 and TBT3 transfers. In short, USB4=USB 3.2+TBT3. USB4, like USB 3.2, also has single channel mode and dual channel mode. The USB4 interface and USB 3.2 interface both support the use of the USB PD fast charging protocol.

USB4 integrates multiple protocols as well as support more devices simultaneously, which involves bandwidth allocation. As shown in the figure below, USB4 can allocate up to 22Gbps of bandwidth for data transmission and at least 18GB of bandwidth for display support. Can connect a display with a resolution of 5120x2880 (5k), a refresh rate of 60Hz, and a color depth of 30bit, leaving 18Gbps of bandwidth for data transmission; You can also connect two videos with a resolution of 4096x2160 (4k), a refresh rate of 60Hz, and a color depth of 30bit, leaving 8Gbps of bandwidth for data transmission.

 

Model :
 
Size :
 

Overview: SAS (Serial Attached SCSI), also known as Serial Attached SCSI, is a new generation of SCSI technology, like the current popular Serial ATA (SATA) hard drives, uses serial technology to achieve higher transmission speeds and improves internal space by shortening connection lines. For raw wires, mainly distinguished based on electrical performance, divided into 6G and 12G, and SAS4.0 24G. However, the mainstream production process is still basically the same. For SAS high-frequency lines, impedance, attenuation, loop loss, and crosstalk are the most important transmission indicators. The operating frequency of SAS high-frequency lines is generally above 2.5GHz. High frequency and low loss communication cables are generally made of foam-polyethylene or foam-polypropylene as insulation materials. Two insulated core wires and two ground wires enter the wrapping machine, and aluminum foil and adhesive polyester tape are wrapped around the insulated core wires and ground wires, insulation process design and process control, structure, electrical performance requirements, and transmission theory of high-speed transmission lines.

Model :
 
Size :
 
 
 

 

DP 2.1 80G 30AWG
material characteristic  
FEP insulation: Before aging:Tensile strength: 2500PSIMin   Elongation:200%Min
PVC insulation: Before aging:Tensile strength: 1500PSIMin   Elongation:100%Min
Item Construction Specification
Core 1 conductor 30AWG 1/0.28mm SPC
insulation FEP
diameter 0.52mm
color white, red
Inner Jacket conductor FEP
diameter 0.93mm*1.44mm
color nature
Lapping drain 34AWG  1/0.16mm TC
material 1 blue AL
material 2 Hot-melt mylar tape
diameter Print distinction
Core 2 conductor 30AWG 1/0.254mm TC
insulation HDPE
diameter 0.68mm
color white, green
Lapping drain 30AWG  1/0.254mm TC
material 1 blue AL
material 2 Hot-melt mylar tape
Core 3 conductor 30AWG 1/0.254mm TC
insulation HDPE
diameter 0.50mm
color black, red
Strand Filler cotton
Shield Graphite conductive cloth
Braid  material 16*10/0.12mm TC
OD  4.0mm
Jacket material PVC
OD  5.30mm
color black
SI characteristic:    
Insertion Loss: 4.6dB/M @10.0GHz  
No suck out to 20GHz    
  • Back to top